JEEPTALK.net: rear upper control arms - JEEPTALK.net

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

rear upper control arms

#1 User is offline   jmart98 

  • Private
  • Group: Members
  • Posts: 7
  • Joined: 12-March 11
  • Gender:Male
  • Location:Miami, Florida

Posted 06 January 2012 - 03:28 AM

Looking for Upper control arms for my 98.

I broke the driver side frame bracket and bent both arms.

Any info on after market frame brackets would also be helpfull.
Thanks
JAIME


#2 User is offline   Jim B 

  • Commander
  • Group: GlobalMod
  • Posts: 8,692
  • Joined: 30-April 03
  • Gender:Male
  • Location:Davie, FL

Posted 06 January 2012 - 07:16 AM

Might have some in my garage laying around. Remind me early next week if I have not responded.

These are stock OEM arms, correct :question:
Posted Image Posted Image
El Niņo
Experience is defined as something you get, after you need it.
Give the world the best you have. The best will come back to you...

There are no rules for good photographs, there are only good photographs.
"Thou shalt not bear false witness against thy neighbour." 9th Commandment.
"Speak not Evil of the absent for it is unjust." George Washington, Rule 89 of Civility and Decent Behavior.
Wheeling Gallery ----- E-Mail
Life Member: South Florida Jeep Club

#3 User is offline   jmart98 

  • Private
  • Group: Members
  • Posts: 7
  • Joined: 12-March 11
  • Gender:Male
  • Location:Miami, Florida

Posted 06 January 2012 - 02:25 PM

Yes Sir ! for now all stck, no lift ....: (

View PostJim B, on 06 January 2012 - 07:16 AM, said:

Might have some in my garage laying around. Remind me early next week if I have not responded.

These are stock OEM arms, correct :question:

JAIME


#4 User is offline   Jim B 

  • Commander
  • Group: GlobalMod
  • Posts: 8,692
  • Joined: 30-April 03
  • Gender:Male
  • Location:Davie, FL

Posted 11 January 2012 - 08:21 AM

Got your private message. Time has been a challenge to dig around the garage.

I'm afraid all I have is 4 of the stock OEM lower control arms, no uppers. :down:

You are welcome to them free of charge if you need these. Let me know.
Posted Image Posted Image
El Niņo
Experience is defined as something you get, after you need it.
Give the world the best you have. The best will come back to you...

There are no rules for good photographs, there are only good photographs.
"Thou shalt not bear false witness against thy neighbour." 9th Commandment.
"Speak not Evil of the absent for it is unjust." George Washington, Rule 89 of Civility and Decent Behavior.
Wheeling Gallery ----- E-Mail
Life Member: South Florida Jeep Club

#5 User is offline   jmart98 

  • Private
  • Group: Members
  • Posts: 7
  • Joined: 12-March 11
  • Gender:Male
  • Location:Miami, Florida

Posted 12 January 2012 - 01:55 PM

Thank you... I will keep them in mind. I just got the frame brackets in the mail from ruffstuffspecialties.com they are awesome ! need to put it up on the lift and inspect.

View PostJim B, on 11 January 2012 - 08:21 AM, said:

Got your private message. Time has been a challenge to dig around the garage.

I'm afraid all I have is 4 of the stock OEM lower control arms, no uppers. :down:

You are welcome to them free of charge if you need these. Let me know.

JAIME


#6 User is offline   ljrubitm 

  • Major
  • Group: Members
  • Posts: 830
  • Joined: 15-January 07
  • Gender:Male
  • Location:Pembroke Pines, Florida

Posted 12 January 2012 - 04:54 PM

http://jeep.auctivac...06-C179873.aspx

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic